Calibrate tank level sensor 

You can calibrate the tank sensors yourself in the Kilter Remote app by following the steps below. Note: You will need to have between 10 and 60 liters in your tank for this calibration to work.

1. Navigate to Settings > Spraying > Periodic Inspection
   
   
   
   
   
2. Scroll down to step 5 - Tank & Chemical Filling. In this step you can calibrate the tank sensor. Press the Tank Calibration button.
   
   
   
   
3. Check the level of liquid on the side of the tank, and enter this to the field shown in the picture below. Then press Start calibration.
   
   
   
   
4. After a few seconds, you should get the message Tank calibration completed successfully! as shown in the picture below. If you do not get this message, try again.