Set NTRIP user name and password

AX-1 needs GNSS correction data to navigate in the field. This is expected to be handled by the farmer/user. NTRIP credentials and mount point can be set using "Kilter Remote" app.

While connected to the robot navigate to the "Settings" tab, and chose the  "GNSS" drop down. Click the "Ntrip Credentials"

You need to enter Username, Password and URL. The url is built up by [link]:[port]/[MountPoint]  See example below or contact your NTRIP provider if you run in to problems. The Fix Status should change to "RTK fix" or "RTK float" if the credentials are correct.

URL: no.nrtk.eu:9301/MSN_iMax
User Name: NtripUsername
Password: Password