Skip to content
English
Sign in
www.kiltersystems.com
  • There are no suggestions because the search field is empty.

Water tank on the Transportation unit

Using the water tank on the transportation unit

  1. Drive the AX-1 close to the trailer and make sure the power generator is running. You will find the filling equipment in the right box. 

IMG_1205

  1. Take out the water hose from the box. Remove the end cap from the hose by turning it counterclockwise 

IMG_1215IMG_1216

 

  1. Connect the power cable to the generator as shown in the picture below.  

The pump will immediately start pumping water when powered. 

IMG_9415

 

  1.  You can now fill the tanks of the AX-1. 

IMG_1206