Route Pattern Generator - Kilter Farm
This is an interactive tool to generate the pattern coordinates to make patterns in your AX-1 treatment route.
For a deeper introduction into patterns, check out this webinar.
For more information regarding building a route in general, check this article.
Kilter Learn · Kilter Farm
Route Pattern Builder
Build a track pattern for the Route Planner Tool, or paste one you have, and see where every track lands before you make the route.
Values in threes, X,Y,Z, separated by commas. Use a point for decimals.
Each group is X,Y,Z: leading gap X from the centre of the track before, then Y tracks spaced Z apart, centre to centre. The first track sits on the AB line. Kilter Farm fills the pattern out on both sides of the AB line until the field is covered; the drawing shows the side to the right.
Pattern settings
Start from an example or build your own. All distances in metres.
Examples
Groups
Offset
Positive moves the pattern to the left, so the AB line ends up to the right of the first track. Negative moves it to the right.